Heavy Duty Lathe Machine :  
 
 
 
BED :
The bed is made from a grade casting 190 to 210 BHN. The bed is well ground and also lapping after the grinding inspected by microlevel & Straight edge.
HEAD STOCK :
New improved Hexagonal design with helical teeth shaving gears for noiseless operation. The height of center is 263 mm (10.5"). Brass is made from led bronz (80:10:10) or SKF Bearing is provided in bearing type.
MAIN SPINDLE :
Made from En8 alloy steel with grinding and Nitriding. The main spindle is supported on precision tapper roller bearing or on brass beaings.
SADDLE :
Well scrapped having the surface & compound screw made from En8 Steel. Millimeter (mm) dials are fitted to facilitate machining to very close limits.
APRON :
A four walled closed type with oil sump apron having a best quality gears. SKF Bearing and bronze metal bush is fitted for smooth operation. Sliding and surfaceing feeds can be engaged by tightening a star knob and engaging lever at appropriate position.
TAIL STOCK :
Hexagonal shapped body with a tool tray on it. Tail Stock spindle of 60 mm Dia. harden & ground made from En8 steel having External & internal grinding with MT-4 internal tapper is provided. It can be off set for tapper turning.
 
Technical Specifications
 
Heavy Duty Lathe Machine
1675mm, 2135mm, 2740 mm, 3050mm & 3660mm
CAPACITY
METRIC
Height of Centre
254 mm
Swing Over Bed
490mm
Swing Over Cross Slide
290mm
Movement of Cross Slide
300mm
Swing in Gap
800mm
BED
-
Bed Type
2 V & 2 Flat
Bed With
325mm
Length of Gap in Bed
150mm
Length of Gap in Front of Face Plate
200mm
MAIN SPINDLE
-
Size of Threaded Spindle Nose
6 T.P.I 75mm
Taper Bore in Spindle Sleeve
MT-4
Spindle Bore
52mm
TAIL STOCK
-
Ram Dimeter
63mm
Taper Bore in Spindle Sleeve
MT-4
Ram Travel
190mm
COMPOUND SLIDE
-
Travel of Compound Slide
150mm
Tool Shank Section
25 x 25mm
SPEEDS
-
No. of Speeds
8
Range
25-475RPM
THREAD / NO. RANGE
-
Lead Screw Diameter & Pitch
38.1mm x 4TPI
Metric
13/1 to 6mm
Inch
19/2 to 24 TPI
ELECTRICAL
-
Main Motor (1440RPM, AC-3 Phase)
2 H.P. / 440 V
MODEL
ADMIT BETWEEN CENTER
WEIGHT (APPROX)
FLOOR SPACE
H-1 1675mm
550mm
1050Kg.
2120 x 1475mm
H-2 2135mm
1000mm
1200Kg.
2575 x 1475mm
H-3 2740mm
1600mm
1400Kg.
3185 x 1475mm
H-4 3050mm
1915mm
1650Kg.
3490 x 1475mm
H-5 3660mm
2525mm
1900Kg.
4100 x 1475mm
Standard Accessories :
Steady Rest, Follow Rest, Face Plate, Chuck Back Plate, Spindle Sleeve, 2 Dead Centre, Change Gear Set, Tool Post Spanner, Switch Stand, Motor Pulley.
Extra Accessories :
Norton Gear Box, Three Speed Gear Box, Rear Tool Post, Electric Motor, Taper Turning Attachment, Electrical Coolant Pump with Fitings, True Chuck, Dog Chuck, Reversible Switch, V-Belt, Machine Lamp, Extra Centre Height.
     
 
 
   
Jayson Machine's Impex- Rajkot (Gujarat - India) 2011© Copyright
Design by Survive Infocom