Light Duty Lathe Machine :  
 
 
 
BED :
The bed is made from a grade casting 190 to 210 BHN. The bed is well ground and also lapping after the grinding inspected by microlevel & Straight edge.
HEAD STOCK :
New improved Hexagonal design with helical teeth shaving gears for noiseless operation. The height of center is 263 mm (10.5"). Brass is made from led bronz (80:10:10) or SKF Bearing is provided in bearing type.
MAIN SPINDLE :
Made from En8 alloy steel with grinding and Nitriding. The main spindle is supported on precision tapper roller bearing or on brass beaings.
SADDLE :
Well scrapped having the surface & compound screw made from En8 Steel. Millimeter (mm) dials are fitted to facilitate machining to very close limits.
APRON :
A four walled closed type with oil sump apron having a best quality gears. SKF Bearing and bronze metal bush is fitted for smooth operation. Sliding and surfaceing feeds can be engaged by tightening a star knob and engaging lever at appropriate position.
TAIL STOCK :
Hexagonal shapped body with a tool tray on it. Tail Stock spindle of 60 mm Dia. harden & ground made from En8 steel having External & internal grinding with MT-4 internal tapper is provided. It can be off set for tapper turning.
 
Technical Specifications
 
Light Duty Lathe Machine
1370mm, 1600mm & 1830mm
CAPACITY
METRIC
Height of Centre
165mm
Swing Over Bed
325mm
Swing Over Cross Slide
180mm
Movement of Cross Slide
225mm
Swing in Gap
500mm
BED
-
Bed Type
2 V & 2 Flat
Bed With
238mm
Length of Gap in Bed
110mm
Length of Gap in Front of Face Plate
125mm
MAIN SPINDLE
-
Size of Threaded Spindle Nose
6 T.P.I. 60mm
Taper Bore in Spindle Sleeve
MT-3
Spindle Bore
40mm
TAIL STOCK
-
Ram Dimeter
38.1mm
Taper Bore in Spindle Sleeve
MT-3
Ram Travel
115mm
COMPOUND SLIDE
-
Travel of Compound Slide
120mm
Tool Shank Section
22 x 22mm
SPEEDS
-
No. of Speeds
8
Range
35-825RPM
THREAD / NO. RANGE
-
Lead Screw Diameter & Pitch
25.4mm x 4TPI
Metric
19/0.50 to 8mm
Inch
23/4 to 40 TPI
ELECTRICAL
-
Main Motor (1440RPM, AC-3 Phase)
1 H.P. / 440 V
MODEL
ADMIT BETWEEN CENTER
WEIGHT (APPROX)
FLOOR SPACE
L-1 1370mm
450mm
575Kg.
1650 x 970mm
L-2 1600mm
725mm
650Kg.
1950 x 970mm
L-3 1830mm
900mm
675Kg.
2100 x 970mm
Standard Accessories :
Chuck Back Plate, Spindle Sleeve, 2 Dead Centre, Change Gear Set, Tool Post Spanner, Switch Stand, Motor Pulley.
Extra Accessories :
Steady Rest, Follow Rest, Rear Tool Post, Face Plate, Norton Gear Box, V-Belt, Three Speed Gear Box, Taper Turning Attachment, Electrical Coolant Pump with Fitings, Electric Motor, True Chuck, Dog Chuck, Reversible Switch, Machine Lamp.
     
 
 
   
Jayson Machine's Impex- Rajkot (Gujarat - India) 2011© Copyright
Design by Survive Infocom